한국 플라스틱 공사

http://eolin.com/member/tb.php?key=145f5f94-5257-102b-8f35-00a0d1e76810

Add comment April 25, 2008

한국 플라스틱 공사

http://eolin.com/member/tb.php?key=145f5f94-5257-102b-8f35-00a0d1e76810

Add comment April 18, 2008

한국 플라스틱 공사

테스트

http://eolin.com/member/tb.php?key=145f5f94-5257-102b-8f35-00a0d1e76810

Add comment April 13, 2008

"누드 消火(器가 빠진) Spray"(영어로 "Nude Fire Extinguishing Spray") 봄봄 봄이 가고 있어요!

“누드 消火(器가 빠진) Spray”(영어로 “Nude Fire Extinguishing Spray”)를 만들면,

이게 한국 소방 검정 공사의 형식 승인 대상이 될까요? 아니면 그냥 일반 스프레이 중에서

안에 불 끄는 소화 약제가 들어 있는 “스프레이”일까요???스프레이의 용어의 정의를 보면, 그냥 눌러서 분사되는 모든 형태의 압력용기 또는 그냥 눌러서(안에 압력이 없어도, 펌프 형식으로)나오는 제품 일체를 말하고 있습니다,,,, 따라서 현재 일반 소화기 메이커들이 만들고 있는 “수동식 분말 소화기” 등등도 명칭을 “수동식 분말 소화 스프레이”라고 쓰고, 팔면 되지 않겠는지 검토합시다.

스프레이가 꼭 오른 쪽 검지 손가락을 눌러서 작동되는 것이면 현재 수동식 분말 소화기는 이 명칭을 붙일 수 없겠지만, 현재 소화기 모양으로 손잡이를 서로 눌러서 작동하는 것을 포함된다면, 현재 소화기의 명칭을 “消火 Spray”로 바꾸면, 한국 소방 검정 공사의 형식 승인이고 지랄이고 필요 없겠지요????이런 논리로 현재 퍼펙트 코리아 혹은 기타

강화액 메이커들이 만드는 “消火具”(소화구)는 명칭을 “소화 스프레이”로 바꾸면 됩니다,

학실이,,,,학실합니다,

따라서 어짜피 공식적으로 “설치 대상물”로도 인정도 못 받고 있는 소화구를 명칭을 소화

스프레이로 바꾸어 팝시다,

자신이 없으면 “대한 소방 공사” 본인의 명의로 팝시다,,,,,

대한 소방 공사 대표 김 성수, Zephyr Archngel
(舊名 : 김 닷줄,筆才,鶴범,東洙,成珠,따쭈리)
Success Kim Zephyr ArchangelKorea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher, Work: 1-404-201-2707Email: kffc@paran.comIM: zephyrarchangel (AIM) http://www.linkedin.com/in/nakedGoogle Blogger 대한 소방 공사Bang Bang Cross RoadYokSam-DongKangNam-Ku, Seoul 135-080 Korea, SouthWe’re hiring!누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher See who we know in common

Add comment April 6, 2008

PC in I-Mode of Hyundai Motor company


http://eolin.com/member/tb.php?key=145f5f94-5257-102b-8f35-00a0d1e76810

http://eolin.com/member/tb.php?key=145f5f94-5257-102b-8f35-00a0d1e76810

Add comment April 3, 2008

Injection blow molding From: "Jerry Jiang"

From: “Jerry Jiang” To: “Korea Fire Fighting Corporation(Kffc)”
Dear Zephyr,

Thanks for your email.

Injection blow molding means that we should inject a tube with a injection machine first then blow the tube to bottle with a blow machine.For example,the molding of PC,AS & PET bottles.And the weight(thickness) of products were determined by the tube.We can not reduce the weight of the tube when the mould finished,but we can increase the weight of the tube by adjust the mould,that is to say,we can adjust the wall thickness of polycarbonate cylinder from 1.0mm up to 1.1,1.2,1.3,1.4mm.

However,the tube mould can not be restored when the weight increased.On the other hand,it will cost us a lot on making samples with different wall thickness.

Extrusion blow molding allows to produce a bottle in one process with the blowing machine and the tube is not necessary.For example,the molding of PE & PP bottles.
Another kind of injection blow molding allows to produce a PC(or some other material) bottle with a automatic injection & blowing machine,and the tube is also necessary during the molding process,but the injection & blowing are finished with the same machine,some of the high clean bottles such as baby feeding bottle are produced via this way.And few or no factory in China owns that equipment.
Hope the above explainations are helpful to you. Any other questions please feel free to let me know.
Best regards,
Jerry

2008/4/2, Korea Fire Fighting Corporation(Kffc) <kffc@paran.com>:
Good Day!
Further to my phone call, the sample of 420ml cylinder(Aluminum) will be despatched to you tomorrow from www.perfect-korea.com by Courrier/Speed/Air Parcel….

However, just before sending the aluminum sample of 420ml, I want to ask you to clarifyl following points by return emails;

1. Can you adjust the wall thickness of Polycarbonate cylinder from 1.4mm thick down to 1.3, 1.2, 1.1, 1.0 with one type of the Injection Blow Mold which should be modified as per your past email before, easily without separate modifications on the original mold for each thicknesses???? I think this would be possible, just adjusting the volume of grenades of Polycarbonate.
I want to know this information, as the wall thickness 1.4mm of my “Nude Fire Extinguishing Spray” might be too thick for the spray type of fire extinguisheres and too strong enough to contain the N2 Gas Pressure of approximately 9.8kgf/cm2(10Bar, 1Mpa) inside the PC cylinder,

2. Can you explain to me the differences of “Injection Blow Molding” between “Extrusion Blow Molding” or just “Blow Molding”? and the cost differences of them????

Looking forward to receiving your answers, just before sending aluminum cylinder to you tomorrow,

Best regards
Zephyr Archangel
Korea Plastic Corporation(Newly eastablished)
Korea Fire Fighting Corporation

http://eolin.com/member/tb.php?key=145f5f94-5257-102b-8f35-00a0d1e76810

Add comment April 3, 2008

한국 플라스틱 공사(KPC)의 이름으로 된 인터넷 사이트 등등


마.그놀리아 라는 새로 나온 북 마크(즐겨 찾기의 영어 번역)관련 사이트입니다, 한국 플라스틱 공사의 이름으로 오픈 아이디로 로긴 할 때는 http://kpc.myid.net로 하면 되고, 가입 이메일 주소는 koplastic@gmail.com입니다,,,,,구글 불로거는 http://koplastic.blogspot.com/ 이 됩니다 마.그놀리아 에서 plastic으로 가입이 되여 있으며, 그 안에서 그룹으로도 되여 있고, 그 링크 불로그 주소는 http://ma.gnolia.com/groups/plastic/bookmarks입니다. 좀 복잡해고 이해하여 합니다, 앞으로의 인터넷 비지니스를 위해서 앞으로 좀 더 있으나, 천천히 하나씩 해 나갑시다. 본 서류는 구글에서 제공하는 인터넷 서류 서비스 중에 하나입니다, 앞으로 마이크로 소프트의 엑셀, 문서, 한글 hwp는 모드 없어 질 것이고, 이런 인터넷 상의 서류로 대체 되고 있습니다, 오늘 얘기한 스프링 노트와 같은 종류이나, 서로 약간 씩 달라요, 이런 종류가 많이 있어요, Zoho, Wiki, Pbwiki, 등등 ……..앞으로 하나씩 해 나갑시다

http://eolin.com/member/tb.php?key=145f5f94-5257-102b-8f35-00a0d1e76810

Add comment April 2, 2008

Thanks again and again for your prompt reply/reaction to my desperate hope to secure “Right Materials of PC Polymer”.In response to your questions;

Thanks again and again for your prompt reply/reaction to my desperate hope to secure “Right Materials of PC Polymer”.In response to your questions;
1.Re 1. You mentioned the application as cylinders for fire extinguishers. Is it a new application or program?>>>”
Completely New Application” as I already tested the feasibility of the part(Nude/Transparent Cylinder of Polycarbonate only), with using the normal and simple water bottles in the markets as the Pressure containing cylinder for Fire Extinguishers(Please see the “Attached Photos of three water bottles which were a little blown out due to inner pressure of Nitrogen gas).Absolutely this is not a program, but a new Application with Polycarbonate Plastics to “Fire Extinguishers”, first time in the world(Until now, some guys had tried but they all gave up finally without any result or success!!!!)
2. Re : the minimum values of -”Chemical resistance” :
Normal Fire Extinguishers over this world have the Dry Chemical(silicone-oiled First Ammonium hosphate, Nh4h2Po4) inside, as “Fire Suppression or Suffectant Material” or AFFF(Aqueous Formal Foaming Foam) or some “Reinforced Liquids”, such as DuPont’s Fire Extinguishant-FE series from “Chemtura”, tyco’s pyro liquids or 3M’s Fluo-Protein free AFFF) or Halon Gas. Therefore the normal chemical resistance of PC at present was believed to be enough to endure the silicone-oiled Nh4h2Po4 or AFFF or DuPont’s Fire Extinguishant or even, Halon Gas. Please kindly re-check the chemical resistance with “Silicone-oiled Nh4h2Po4″ as dry chemicals for fire suffectant, AFFF as liquidified Fire Suppression materials, or “Halon Gas”(soon, Halon will be prohibited in some years as it deteriorates the atmosphere in the air)- “Flame retardancy” : Flame retardancy is not so important for fire extinguishers, but the Regulation will require “Flame retardancy. The Sprinklers in the ceilings are designed to operate at the temperature of 72 centi-grades or less, which means the temperature of 72 centi-degrees are fires occurred nearby!!! With this concept to apply for fire extinguishers, the flame retardancy for Nude/Transparent Cylinder with normal Polycarbonateis enough. Please keep in mind, the Fire Extinguisher is not dangerous or hazardous materials any more, in the fires, when explosed or touched with “fire” at the temperature over 72 centi-degrees nearby yourself, which means there is “FIRE” around yourself!!!!. About ten years ago, when normal fire extinguishers were filled with Dry Chemicals together with CO2 cylinder as pressure inside(Now this “Pressure Adding method of fire extinguisher” can be found nearby yourself also, together with normal “Pressure Containing Fire Extinguishers” in this world) which is new model and replacements of “Pressure Adding Fire Extinguishers”- “Dimensional stability” :As an “Automatically Diffusing Fire Extinguishers” with Polycarbonate Cylinder, the Nude/Transparent cylinder for fire extinguishers should remain the dimension until 72 centi-degree or some higher temperature. When the temperature reaches over 100, then the “Nude/Transparent Cylinder will start to operate automatically to melt down and then explode or diffuse the “Fire Suppression Chemicals, inside” to the fire nearby and then automatically put off FIRE without manual operation by human beings. Therefore If and when the fire extinguishers with Nude/transparent Polycarbonate cylider are furnished in the offices, builings, homes, that means you have an automatic fire extinguishers at same time!!!!
3. Regulation or Standard your part needs to comply with.:::
Until now, there have been “No, absolutely Never” fire extinguisher with plastic cylinder!!! , which means there are no specific Regulation or standard my part needs to comply. However, considering and comparing with normal “Iron-clad, Alumiminum or canned spray types of small fire extinguishers over the world, the regulation and standard should be lighter tha aluminum in the tensile strengths, elongations and other characteristics of materials. As Fire Extinguisher, the outer cylinder roles only for pressure containing of Nitrogen gas as a power source to emit or diffuse the inside “Fire Suppression Chemicals” through nozzle or valve in the neck of fire extinguisher. If and when PC cylinder is used, then the outer container can be an automatic Switch which operates at the termperature of over 72 centi-degrees, melting PC in the fire and then this Switch in the form of PC cylinder automatically emit or diffuse the chemical materials inside without manual oeration by human beings.
4. “Environments to be exposed to” :
Indoor, or outdoor, all over the places in the world, just like a fire extinguisher, nearby yourself, including, but not limited to, homes, offices, buildings, factories and so on and on. The exposing temperatue is hottest weather in Saudi Arabia or coldest weather in Antarctic/Arctic camps or buildings, or in Russia or in Finland. To my knowledge, the temperature endurance of normal PC would be sufficient for the Environment(-45+145centigrades)
5. Dimensions of fire extinguishes:
Normal and simple fire extinguishers contain 3.75 Litres in volume(Weight of materials:3.0kgs), with so many varieties of dimensions(Please just look around yourself to find out any fire extinguisher, near by you in home, office, and subways or buses, or railroads). There are so many different dimensions in this world. But very popular and normal dimensions are as follows;- Height : approximately 55 cm- Diameter : appoximately 16 cm- Total Weight including Fire Suppression materials in Dry Chemical(ABC fire types) : 5.0kgs in Iron, Cold rolled coil, weldded in the middle- Net weight of Dry Chemicals : normally 3.0kgs- Net Volume of Fire Extinguishes(3.0kgs) : 3.75 Litres
6. How will my Nude/Transparent Fire Extinguishers be assembled?:
Just like same as normal fire extinguishers, only replacing the Iron/Aluminum out cylinder with Polycarbonate Plastic cylinders, Now I am also asking a completely new concept about “Valve for Fire Extinguisher” and “Plastic Sprinkler” using other engineering plastics(such polymer, MC900 or Acetyle or Nylon Double Glass, named by Korea) to replace also the Iron/Aluminum Sprinklers and valves for fire extinguisher in this world, all over the world. Later I will apply these Plastic valves to my “Nude/Transparent Cylinder for fire extinguishers”. but now at the moment, I should use the Iron/Aluminum/Die-casted steel valves to seal or tighten the Pressure gas(Nitrogen gas) at the neck of PC cylinder as kinds of lids of normal water bottles. This means that at this moment, My Nude cylinder of PC should be tightened and sealed with Iron/Aluminum/Die-casted steel valves as usual and norml fire extinguisher all around yourself, only replacing the outer cylinder with my Nude Cylinder of PC.
7. How will the parts be processed?:
Just like a water container for purified Avian, Mineral water, my Nude cylinder can be processed. Blow molding or Direct Blow molding method can be applied, never with Injection molding method. Please consider that you are making another type of water bottles with thicker and bigge water bottles than normal ones
8.Annual consumption I expect per year???Can you imagine that how many fire extinguishers exist in the world, and How many years those fire extinguishers should be replaced with new ones for the emergent uses at one time in case of fires around yourself???If and when this application is feasible, then the annual consumption of PC granulates would be one million per year!!!!
9. The sample in the form of sheets or granulates:If you have the sheets, then I would like to receive for tests, but I prefer to receive in the form of tubes or bottles, if you have. Some weeks later, some granulates will be needed for the test of mass production in the form of cylinders with Blow molding. Definitely please try to find out any type of bottle(water or chemical container) to meet with above-mentioned requirement, and send to me for more specific and final tests for final mass production.Thansk and thanks for your patience to read my above-informationOnce again today is the first day of Spring Season in Korea, and first weekend of March, 2008. Have a lustful weekend!!!
Subject : RE: Transparent Cylinder for Fire Extinguishers Date : Feb 29, 2008 Company : Bayer MaterialScience From : Ms. Reema Iqbal Message details Message history
Dear Mr. Archangel,
In relation to your request related to Transparent Cylinder for Fire Extinguishers, I thank you for sending more details . I would like to ask few more technical questions regarding in order to better understand your application requirements. Please take some time to respond with as much detail as possible so that Bayer can guide you better.1. You mentioned the application as cylinders for fire extinguishers. Is it a new application or program?2. The important physical properties to be achieved mentioned by you are:–Chemical resistance-Flame retardancy-Dimensional stabilityPlease give the minimum values that are required so that Bayer can guide you better.3. Specify the regulation or standard your part needs to comply with.4. What environments do you expect that your part will the part be exposed to?5. Please describe the dimensions of your part.6. How will your part be assembled?7. How will the parts be processed?8. How much material do you expect to use per year this program?Also I would like to know whether you want to receive the sample in the form of sheets or granulates.I look forward to hearing from you shortly.Regards,Reema Iqbal
대한 소방 공사 대표 김 성수, Zephyr Archngel
(舊名 : 김 닷줄,筆才,鶴범,東洙,成珠,따쭈리)
Success Kim Zephyr ArchangelKorea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher, Work: 1-404-201-2707Email: kffc@paran.comIM: zephyrarchangel (AIM) http://www.linkedin.com/in/nakedGoogle Blogger 대한 소방 공사Bang Bang Cross RoadYokSam-DongKangNam-Ku, Seoul 135-080 Korea, SouthWe’re hiring!누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher

Subject : (Repeat) on Mar 3rd, 2008 for More Information about my Nude/Transparent/Polycarbonate Cylinder as Pressure Container for Fire Extinguishers, Air Neutralizer, Shaving Foam Can(Now Plastic Bottle) and so on
Date : Mar 3, 2008
Company : Korea Fire Fighting Corporation
From : Mr. Zephyr Archangel
Message details Message history

function NavigateLink(url,idMess) { var form = document.forms["formMessNavigate"]; form.action = url; form.target = “”; form["hIdMess"].value=idMess; form.submit(); } Thanks again and again for your prompt reply/reaction to my desperate hope to secure “Right Materials of PC Polymer”.In response to your questions;

1.Re 1. You mentioned the application as cylinders for fire extinguishers. Is it a new application or program?>>>”

Completely New Application” as I already tested the feasibility of the part(Nude/Transparent Cylinder of Polycarbonate only), with using the normal and simple water bottles in the markets as the Pressure containing cylinder for Fire Extinguishers(Please see the “Attached Photos of three water bottles which were a little blown out due to inner pressure of Nitrogen gas).Absolutely this is not a program, but a new Application with Polycarbonate Plastics to “Fire Extinguishers”, first time in the world(Until now, some guys had tried but they all gave up finally without any result or success!!!!)

2. Re : the minimum values of -”Chemical resistance” :

Normal Fire Extinguishers over this world have the Dry Chemical(silicone-oiled First Ammonium hosphate, Nh4h2Po4) inside, as “Fire Suppression or Suffectant Material” or AFFF(Aqueous Formal Foaming Foam) or some “Reinforced Liquids”, such as DuPont’s Fire Extinguishant-FE series from “Chemtura”, tyco’s pyro liquids or 3M’s Fluo-Protein free AFFF) or Halon Gas. Therefore the normal chemical resistance of PC at present was believed to be enough to endure the silicone-oiled Nh4h2Po4 or AFFF or DuPont’s Fire Extinguishant or even, Halon Gas. Please kindly re-check the chemical resistance with “Silicone-oiled Nh4h2Po4″ as dry chemicals for fire suffectant, AFFF as liquidified Fire Suppression materials, or “Halon Gas”(soon, Halon will be prohibited in some years as it deteriorates the atmosphere in the air)- “Flame retardancy” : Flame retardancy is not so important for fire extinguishers, but the Regulation will require “Flame retardancy. The Sprinklers in the ceilings are designed to operate at the temperature of 72 centi-grades or less, which means the temperature of 72 centi-degrees are fires occurred nearby!!! With this concept to apply for fire extinguishers, the flame retardancy for Nude/Transparent Cylinder with normal Polycarbonateis enough. Please keep in mind, the Fire Extinguisher is not dangerous or hazardous materials any more, in the fires, when explosed or touched with “fire” at the temperature over 72 centi-degrees nearby yourself, which means there is “FIRE” around yourself!!!!. About ten years ago, when normal fire extinguishers were filled with Dry Chemicals together with CO2 cylinder as pressure inside(Now this “Pressure Adding method of fire extinguisher” can be found nearby yourself also, together with normal “Pressure Containing Fire Extinguishers” in this world) which is new model and replacements of “Pressure Adding Fire Extinguishers”- “Dimensional stability” :As an “Automatically Diffusing Fire Extinguishers” with Polycarbonate Cylinder, the Nude/Transparent cylinder for fire extinguishers should remain the dimension until 72 centi-degree or some higher temperature. When the temperature reaches over 100, then the “Nude/Transparent Cylinder will start to operate automatically to melt down and then explode or diffuse the “Fire Suppression Chemicals, inside” to the fire nearby and then automatically put off FIRE without manual operation by human beings. Therefore If and when the fire extinguishers with Nude/transparent Polycarbonate cylider are furnished in the offices, builings, homes, that means you have an automatic fire extinguishers at same time!!!!

3. Regulation or Standard your part needs to comply with.:::

Until now, there have been “No, absolutely Never” fire extinguisher with plastic cylinder!!! , which means there are no specific Regulation or standard my part needs to comply. However, considering and comparing with normal “Iron-clad, Alumiminum or canned spray types of small fire extinguishers over the world, the regulation and standard should be lighter tha aluminum in the tensile strengths, elongations and other characteristics of materials. As Fire Extinguisher, the outer cylinder roles only for pressure containing of Nitrogen gas as a power source to emit or diffuse the inside “Fire Suppression Chemicals” through nozzle or valve in the neck of fire extinguisher. If and when PC cylinder is used, then the outer container can be an automatic Switch which operates at the termperature of over 72 centi-degrees, melting PC in the fire and then this Switch in the form of PC cylinder automatically emit or diffuse the chemical materials inside without manual oeration by human beings.

4. “Environments to be exposed to” :

Indoor, or outdoor, all over the places in the world, just like a fire extinguisher, nearby yourself, including, but not limited to, homes, offices, buildings, factories and so on and on. The exposing temperatue is hottest weather in Saudi Arabia or coldest weather in Antarctic/Arctic camps or buildings, or in Russia or in Finland. To my knowledge, the temperature endurance of normal PC would be sufficient for the Environment(-45+145centigrades)

5. Dimensions of fire extinguishes:

Normal and simple fire extinguishers contain 3.75 Litres in volume(Weight of materials:3.0kgs), with so many varieties of dimensions(Please just look around yourself to find out any fire extinguisher, near by you in home, office, and subways or buses, or railroads). There are so many different dimensions in this world. But very popular and normal dimensions are as follows;- Height : approximately 55 cm- Diameter : appoximately 16 cm- Total Weight including Fire Suppression materials in Dry Chemical(ABC fire types) : 5.0kgs in Iron, Cold rolled coil, weldded in the middle- Net weight of Dry Chemicals : normally 3.0kgs- Net Volume of Fire Extinguishes(3.0kgs) : 3.75 Litres

6. How will my Nude/Transparent Fire Extinguishers be assembled?:

Just like same as normal fire extinguishers, only replacing the Iron/Aluminum out cylinder with Polycarbonate Plastic cylinders, Now I am also asking a completely new concept about “Valve for Fire Extinguisher” and “Plastic Sprinkler” using other engineering plastics(such polymer, MC900 or Acetyle or Nylon Double Glass, named by Korea) to replace also the Iron/Aluminum Sprinklers and valves for fire extinguisher in this world, all over the world. Later I will apply these Plastic valves to my “Nude/Transparent Cylinder for fire extinguishers”. but now at the moment, I should use the Iron/Aluminum/Die-casted steel valves to seal or tighten the Pressure gas(Nitrogen gas) at the neck of PC cylinder as kinds of lids of normal water bottles. This means that at this moment, My Nude cylinder of PC should be tightened and sealed with Iron/Aluminum/Die-casted steel valves as usual and norml fire extinguisher all around yourself, only replacing the outer cylinder with my Nude Cylinder of PC.

7. How will the parts be processed?:

Just like a water container for purified Avian, Mineral water, my Nude cylinder can be processed. Blow molding or Direct Blow molding method can be applied, never with Injection molding method. Please consider that you are making another type of water bottles with thicker and bigge water bottles than normal ones

8.Annual consumption I expect per year???Can you imagine that how many fire extinguishers exist in the world, and How many years those fire extinguishers should be replaced with new ones for the emergent uses at one time in case of fires around yourself???If and when this application is feasible, then the annual consumption of PC granulates would be one million per year!!!!

9. The sample in the form of sheets or granulates:If you have the sheets, then I would like to receive for tests, but I prefer to receive in the form of tubes or bottles, if you have. Some weeks later, some granulates will be needed for the test of mass production in the form of cylinders with Blow molding. Definitely please try to find out any type of bottle(water or chemical container) to meet with above-mentioned requirement, and send to me for more specific and final tests for final mass production.Thansk and thanks for your patience to read my above-informationOnce again today is the first day of Spring Season in Korea, and first weekend of March, 2008. Have a lustful weekend!!!

Subject : RE: Transparent Cylinder for Fire Extinguishers Date : Feb 29, 2008 Company : Bayer MaterialScience From : Ms. Reema Iqbal Message details Message history

Dear Mr. Archangel,

In relation to your request related to Transparent Cylinder for Fire Extinguishers, I thank you for sending more details . I would like to ask few more technical questions regarding in order to better understand your application requirements. Please take some time to respond with as much detail as possible so that Bayer can guide you better.1. You mentioned the application as cylinders for fire extinguishers. Is it a new application or program?2. The important physical properties to be achieved mentioned by you are:–Chemical resistance-Flame retardancy-Dimensional stabilityPlease give the minimum values that are required so that Bayer can guide you better.3. Specify the regulation or standard your part needs to comply with.4. What environments do you expect that your part will the part be exposed to?5. Please describe the dimensions of your part.6. How will your part be assembled?7. How will the parts be processed?8. How much material do you expect to use per year this program?Also I would like to know whether you want to receive the sample in the form of sheets or granulates.I look forward to hearing from you shortly.Regards,Reema Iqbal

?? ?? ?? ?? ? ??, Zephyr Archngel
(?? : ? ??,??,??,??,??,???)
Success Kim Zephyr ArchangelKorea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher, Work: 1-404-201-2707(U.S.A.) Email: kffc@paran.com AIM: successkim, zephyrarchangel (Skype) http://www.linkedin.com/in/naked Google Blogger(http://kffc.blogspot.com and http://korea.fire.fighting.corporation.blogspot.com and so many blogs and weblogs in the world) ?? ?? ??Bang Bang Cross RoadYokSam-DongKangNam-Ku, Seoul 135-080 Korea, SouthWe’re hiring!??, ???, ???????, ??, Polycarbonate, Nude, Fire, Extingusher
(My work e-Mail Address is kffc@paran.com)

Add comment March 3, 2008

Hello world!

Welcome to WordPress.com. This is your first post. Edit or delete it and start blogging!

1 comment March 2, 2008

IdTail-Fire


myfire.idtail.com

프로필 사진투명 소화기 만드는 대한 소방 공사, Zephyr Archangel (Korea Fire Fighting Corporation)

Blessing you as Zephyr Archangel, a Merry and Lustful Christmas this year of Two Thousand Se7en and Wish you anticipating New and Prosperous New Solar Year of Two Thousand Ei8ht!

관심분야 :

  • 누드

    • ,

  • 소화기

    • ,

  • 투명

    • ,

  • 나체

    • ,

  • 섹시

    • ,

  • 여자

    • ,

  • 레이디

    • ,

  • 처녀

    • ,

  • 소방

    • ,

  • 돈

    • ,

  • 여행

    • ,

  • 패러글라이딩

    • ,

  • Zephyr

    • ,

  • Archangel

    • ,

  • 미풍

    • ,

  • 대천사

    • ,

  • 메일

    • ,

  • 크리스마스

    • ,

  • 이 명박

    • ,

  • 조선 댄장

    • ,

  • myopenid

    • ,

  • myid.net

    • ,

  • technorati

    • ,

  • del.icio.us

    • ,

  • polycarbonate

    • ,

  • 폴리카보네이트

    • ,

  • 플라스틱

    • ,

  • 엔지니어링
자주 머무는 곳 : 서울시 강남구 역삼동

홈 페이지 : http://nude.aaa.to

방명록명함관리

<!–

더 보기

–>

회사 편집전체 공개전체 공개?

학교 편집전체 공개전체 공개?

  • 불릿 고려 대학(교)

연락처 편집

웹 사이트 편집


다음 블로그

새로고침


이글루스

새로고침


야후 블로그

새로고침


엠파스 블로그 대한소방공사대표김성수ZephyrArchangel

새로고침


싸이월드 페이퍼

새로고침


네이트 통

새로고침


파란 블로그

새로고침


티스토리

새로고침


방명록 (총 2개의 글)

전하시고 싶은 글을 남겨주세요(1000자이내)
비밀글글남기기
  • 작성자 사진투명 소화기 만드는 대한 소방 공사, Zephyr Archangel(fire)11 분 전제 삭제답변 답변

    http://nude.newsvine.com/
    엔지니어링 플라스틱(engineering plastics, EP)이란 “구조용 및 기계부재에 적합한 고성능플라스틱으로서 주로 금속 대체를 목표로 한 것” 또는 “자동차부품이나, 기계부품, 전기, 전자부품과 같은 공업적 용도에 사용되는 플라스틱이며, 500kgf/cm2(49MPa) 이상의 인장강도, 20,000kgf/cm2(2GPa)이상의 굴곡탄성율, 100도씨 이상의 내열성을 갖는 것” 그리고 내열성이 더욱 높아 150도 이상의 고온에서도 장기간 사용할 수 있는 것을 특수엔지니어링 플라스틱(specialty engineering plastics) 또는 슈퍼엔지니어링 플라스틱(super engineering plastics)이라고 합니다.

    엔지니어링 플라스틱의 종류는 다음과 같으며, 여기에서 소개한 엔지니어링 플라스틱은 열가소성플라스틱입니다. 열가소성플라스틱은 가격, 시장규모, 내열성, 기계적특성 등의 차이로 범용 플라스틱과 엔지니어링 플라스틱으로 분류되며, 엔지니어링 플라스틱도 같은 분류법으로 범용엔지니어링 플라스틱과 슈퍼엔지니어링 플라스틱으로 분류됩니다.

    범용엔지니어링 플라스틱 중 폴리아미드(PA), 폴리아세탈(POM), 폴리카보네이트(PC), 폴리페닐렌옥사이드(M-PPO), 폴리부틸렌테레프탈레이크(PBT) 등 5가지 플라스틱은 그 우수성 때문에 각종 산업에 침투하고 있습니다. 따라서 이들을 총칭하여 5대 엔지니어링 플라스틱이라 부르고 있습니다.

    슈 퍼엔지니어링 플라스틱은 1964년 폴리이미드(PI)가 개발된 것을 시작으로 1960년대에는 폴리술폰(PSF)이, 1970년대에는 폴리페닐렌설피드(PPS), 폴리아미드이미드(PAI), 폴리에테르술폰(PES), 폴리에테르에테르케톤(PEEK), 폴리에테르이미드(PEI), 액정폴리에스테르(LCP), 폴리에테르케톤(PEK) 등이개발되었습니다.

  • 전하시고 싶은 글을 남겨주세요(1000자이내)확인
  • 작성자 사진투명 소화기 만드는 대한 소방 공사, Zephyr Archangel(fire)9 일 전제 삭제답변 답변

    안녕하세요, 누드 소화기 만드는 대한 소방 공사입니다.

    아이디테일 서비스에서 저와 네트워크를 맺으실 수 있도록 초대 드립니다.

    아이디테일은 나의 모습을 표현하고 다양한 사람들과 네트워크를 맺을 수 있는 서비스입니다. 같은 관심 분야를 가지고 있는 분들이나 학교 동창, 직장 동료분들과도 네트워크를 맺을 수 있습니다.

    누드 소화기 만드는 대한 소방 공사 드림

  • 전하시고 싶은 글을 남겨주세요(1000자이내)확인
이전 이전 1

IDtail로 초대하면 스케쥴러와 아이팟터치가

네트워크 검색

<!–고급 검색–>찾기

안테나

전체보기

네트워크(5)

전체보기

  • arch
  • naked
  • poly
  • Zephyr
  • nude

최근 방문자(7)

전체보기

  • luna
  • pebblebeach
  • nude
  • hzoo
  • sanmaul
지인 초대하기
명함 관리하기 bullet

RSS를 새로 고치는 중…

-——— [ Original Message ] ———-

Subject: [ 아이디테일] 안녕하세요, 아이디테일입니다.

Date: Thu, 20 Dec 2007 11:44:01 +0900

From: Hyunjoo Park <hzoo@ahnlab.com>

To: nudepc@gmail.com, zephyrarchangel@dada.net, polycarbonate@dada.net, zephyrangel@naver.com, kffc@paran.com

안녕하세요, 아이디테일입니다.

 

다름이 아니라 여러 회원님들의 마이디테일을 확인하던 중

대한소방공사님을 포함하여 대한소방공사님과 네트워크 관계인 분들의 마이디테일을 보게 되었습니다.

> http://zephyr.idtail.com/
> http://nude.idtail.com/
> http://poly.idtail.com/
> http://naked.idtail.com/
> http://fire.idtail.com/

 

아이디테일을 여러분의 네트워크 확장의 도구로, 나를 홍보하는 장소로 사용하시는 것에 대해서는 저희도 대환영입니다만

현재 저희가 위 주소의 마이디테일을 확인한 바로는 표기된 내용과 등록된 홈페이지의 내용 등이

상당히 선정적인 내용으로 파악되었습니다.

 

이에 보다 건전하고 유용한 SNS 서비스로 거듭나고자 하는 아이디테일의 입장에서

2007년 12월 21일 (금요일)까지 해당 내용들의 수정을 정중하게 요청드립니다.

만약 해당 일자까지 수정이 되지 않을 경우에는 부득이하게 아이디테일 이용약관 “제12조 계약 해지 및 이용제한”과 “제14조 회원의 게시물관리” 등의 조항에 따라 별도의 통보없이 탈퇴처리가 되실 수 있습니다.

 

다시한번 해당 마이디테일의 내용에 대한 수정을 정중하게 요청드리며

보다 나은 서비스를 위한 아이디테일의 입장임을 이해 부탁드리겠습니다.

 

그럼 좋은 하루 되시길 바랍니다.

 

 
대한 소방 공사 대표 김 성수, Zephyr Archngel(舊名 : 김 닷줄,筆才,鶴범,東洙,成珠,따쭈리) 







Success Kim Zephyr ArchangelKorea Fire Fighting Corporation, who are the inventor of Nude Fire Extinguisher,












Work: 1-404-201-2707
Email:kffc@paran.comIM: zephyrarchangel (AIM)http://www.linkedin.com/in/nakedGoogle Blogger
대한 소방 공사Bang Bang Cross RoadYokSam-Dong             KangNam-Ku, Seoul 135-080 Korea, SouthWe're hiring!누드, 소화기, 폴리카보네이트, 충약, Polycarbonate, Nude, Fire, Extingusher










See who we know in common
Do you know "Zephyr Archangel?

Add comment December 25, 2007

Next Posts Previous Posts

Pages

Blogroll

Feeds

 

November 2009
M T W T F S S
« Aug    
 1
2345678
9101112131415
16171819202122
23242526272829
30